Lebus Grooved Quad Drums High Speed Electric Cable Pulling Winch
Breif introduction
We also supply LBS grooved drum used in all kinds of winchs. The
whole drum details as follows:
1. the groove is cut directly into the body of drum.
2. according to the customer' requirements, the flanges are either
welded or screw-bolted.
3. the groove is available as either LBS-groove or helical-groove.
4. groove geometry is determined by rope construction, diameter and
length ,and by application.
5. the drum is provided with the requested mounting dimensions to
fit the flanges by welding or screw bolting.
Other products
Sleeves are used to prevent damage to a drum. It is usually cheaper
to replace a worn out sleeve in stead of replacing or repair the
complete drum assembly.
The LBS split-sleeve system consists of a pair of outer shells that
are bolted or welded onto a smooth drum to provide a grooving
pattern. either LBS parallel grooves can be carved into sleeves. As
with all LBS drums, the grooving in split sleeves is engineer to
much the specific rope construction, diameter and length, and to
suit
We can design the LBS sleeve according to the drum's size and
parameter.So the customer need to provide some paramter as follows:
Company introduction
Our factory has more than 2000 sets of advanced equipment such as
casting, forging, gear processing, sheet metal stamping, riveting,
heat treatment and mechanical processing. In recent years, the
Germany CW1000 machining center, CNC four axis, five axis linkage
machining center, CNC punch, large CNC hobbing gear grinding
machine, large CNC floor boring and milling machine, Vacuum
electron beam welding, CNC welding robot and 80 roll machine and
other advanced processing equipment.
Advantages of the Sleeve
When the split type drum fence skin is installed, the split fence
skin sleeve is wrapped on the smooth slotless drum, and is closely
connected with the drum through bolts or welding, so that the
original smooth surface of the drum outside the surface becomes the
form of lebus double folding rope groove which is convenient for
the application of winch modification or replacement of the drt
Drums information
| the drum's outer diameter | LBS sleeves diameter |
| width between the flanges | 320mm 550mm or as your requirement |
| the rotation direction | left or right |
| wire rope diameter and structure | 22mm 33mm or any others |
| the material | Q345B or high strength steel |
| the surface hardness | as your requirements
|
