Wire Rope Winding Winch Stainless Steel Lebus Grooved Cable Multi
Drums
Double drum winch
In order to meet the requirements of drilling technology and
transportation, the winch is usually designed as a multi-shaft
drive and separate transportation, which not only makes the system
complex, but also increases the cost and installation workload. To
this end, the transmission scheme of the winch, power input mode
and the structure of the winch frame have done pioneering work, my
company designed a double drum winch. The winch is mainly composed
of base, winch frame, roller shaft, sand drum shaft, shaft drive
boxes, disc brake, crash-proof crown device, main brake mechanism
and automatic driller, etc, and power shift between the input shaft
and the shaft adopts mechanical transmission, drive shaft and
roller shifting between adopts pneumatic clutch to shift, with four
are blocked, reverse gear. Finite element software was used to
simulate and analyze the drum shaft and check its strength and
stiffness. The analysis and check results show that the design of
the drum and frame of the winch is reasonable and meets the
practical work requirements.
Product Key Dimensions:
1) Wire rope or cable diameter (mm)
2) The inner diameter of the sleeves? (or the outer diameter of the smooth drum)
3) The length of the sleeves? (or the distance between two flanges ,no wear plates)
4) Material of the drum sleeves
5) The rotation direction of the drum groove?
6) Type of rope entry
Technical parameters and application:
| No: | Wire diameter(mm): | Rotation direction | Main drum
diameter(mm) | Main drum length(mm) | Application |
| 1 | 8 10 13 | Lefthand,Righthand | 430 | 763 | The oil workover rig winch,
Towing winch
Tower crane |
| 2 | 13 18 20 | Lefthand,Righthand | 623 | 1144 | Engineering winch,
Lifting winch,Crawler crane |
| 3 | 22 25 26 | Lefthand,Righthand | 730 | 1220 | Oil workover rig ,
Logging Winch |
| 4 | 18 22 32 | Lefthand,Righthand | 670 | 1240 | Drilling Rig Winch,
drawworks |
| 5 | 28 32 36 40 | Lefthand,Righthand | 560 | 630 | Rotating Drilling Rig winch,
Lifting equipment |
| 6 | 26 28 32 45 | Lefthand,Righthand | 760 1146 | 1970 1765 | Offshore Crane,
Marine crane,Mooring winch |
Product intruduction
| ther name: | Wire Rope Winding Winch Stainless Steel Lebus Grooved Cable Multi
Drums |
| Hoist speed | 0.95-1.27m/s |
| Rotate speed | 720-960 r/min |
| Rope diameter | 3-30mm |
| Sling type | wire |
| Direction rotation | left or right |
| Application | hoist |
| Parameter | can be designed |
| Application | mining,oil drilling,or coal mine |
| Drum diameter | 900mm |
| Drum width | 600mm |
Product Application:
1. Marine ship machinery: offshore oil crane winch, mooring winch,
traction winch, towing winch, anchor winch and hydrological winch
2. Petroleum industry: oil drilling rig, oil logging truck winch,
oil workover rig, wiper, oil truck winch, etc
3. Hoisting machinery: crane, tower crane winch, gantry crane
winch, crawler crane winch, tire crane winch
4. Construction machinery: construction wall cleaning winch, single
drum winch and double drum winch
5. Other construction machinery: cable winch, tower crane, pile
driver, electric hydraulic winch
6. Mining machinery: dispatching winch, traction winch, inclined
shaft winch, etc
Company introduction
Our company early introduction of advanced technology at home and
abroad, after years of research and development and improvement, in
the hoisting machinery multi-layer wire rope row rope field has
made a major breakthrough,
In 2010, the company obtained the production patent of double
folding rope groove drum, and founded its own brand - LBS. At
present, the company has formed a mature and stable,
serializedproduct production mode.
When the split type drum fence skin is installed, the split fence
skin sleeve is wrapped on the smooth slotless drum, and is closely
connected with the drum through bolts or welding, so that the
original smooth surface of the drum outside the surface becomes the
form of lebus double folding rope groove, which is convenient for
the application of winch modification or replacement of the drum.
Our factory has more than 2000 sets of advanced equipment such as
casting, forging, gear processing, sheet metal stamping, riveting,
heat treatment and mechanical processing. In recent years, the
Germany CW1000 machining center, CNC four axis, five axis linkage
machining center, CNC punch, large CNC hobbing gear grinding
machine, large CNC floor boring and milling machine,
Vacuum electron beam welding, CNC welding robot and 80 roll machine
and other advanced processing equipment.
