Construction and Mining equipent Alloy Steel Wire Rope Lebus
Grooved Winch Drum
Overview
The Lebus cable groove winch developed by our company solves the
following problems:
1. The steel wire rope can be wrapped in multiple layers without
disorderly rope;
2. Wire rope winding speed is not restricted;
3. The load is evenly distributed between the wire ropes;
4. Under the condition of load, no rope biting or rope skipping
between the wire ropes;
5. Reduce the damage of wire rope and improve the safety;
6. Reduce the downtime of wire rope replacement, greatly improve
the work efficiency.
After using a large number of data sheet: prolong the service life
of wire rope more than 500%
Range of application
Widely used in offshore platforms, petroleum machinery, water
conservancy machinery, port machinery, large engineering machinery
lifting equipment.
Product Introduction
Grooved Winch Drum Material: Carbon Steel, Alloy Steel, Stainless
Steel, Aluminum, High-Strength Steel, Etc
Material Standards: GB, AISI, ASME, ASTM, JIS, DIN, ...
Ambient Temperature: -40 ° C To +45 ° C
Stroage Ambient Temperature: -40 ° C To +50 ° C
Groove Type of Drum: Spiral Grooves or Lebus Grooves
The Rotation Direction of The Drum: Lefthand or Righthand
Processing method: Machine Work
Wire Rope Diameter: 3 MM~100 MM
Processing Equipment: CNC machining center
types of structure
Winch drum with groove mainly has the following three types of
structure
1, splicing type. In this structure, the rope groove body is first
made into 4 pieces of tile, and then the 4 pieces of tile groove
and light drum body are spliced and welded together
2, integral, is the rope groove is directly located on the drum
body, rope groove and drum body as one.
3. Plug welding type, make the rope groove into a cylinder body,
and then cut it into 2 pieces of tiles, and plug welding on the
drum body.
Product information
| The name | Construction and Mining equipent Alloy Steel Wire Rope Lebus
Grooved Winch Drum |
| Hoist speed | 0.95-1.27m/s |
| Rotate speed | 720-960 r/min |
| Rope diameter | 3-30mm |
| Sling type | wire |
| Direction rotation | left or right |
| Application | hoist |
| Parameter | can be designed |
| Application | mining,oil drilling,or coal mine |
| Drum diameter | 900mm |
| Drum width | 600mm |
Technical Parameters
| No: | Wire diameter(mm) | Pulling Force(KN) | Rotation Direction | Drum Diameter(mm) | Drum Length(mm) |
| 1 | 3~8 | 3~10 | Lefthand,Righthand | >160 | <1000 |
| 2 | 10~16 | 12~20 | Lefthand,Righthand | >320 | <1000 |
| 3 | 18~24 | 20~80 | Lefthand,Righthand | >480 | <1000 |
| 4 | 26~32 | 100~120 | Lefthand,Righthand | >640 | <1000 |
| 5 | 34~40 | 150~200 | Lefthand,Righthand | >800 | <1000 |
| 6 | 42~50 | 240~400 | Lefthand,Righthand | >1000 | <1000 |
Service conditions of Lebus groove
1. The flanges of drum shall be perpendicular to drum wall at any
conditions,even under the load.
2. The rope must be kept under tension in the process of spooling
so that the rope will be crushed against groove wall. When spooling
can not meet this condition,a press roller shall be used.It is
generally recommended that the tension of the rope should be at
least 2% breaking tension or 10% working load.
3. The fleet angle range should generally never be more than 1.5
degrees and not less than 0.25 degrees.
4. When the wire rope released from the drum goes around the
sheave,the center of sheave should be over the center of drum.
5. The rope must be kept round,not loose,even under the maximum
load.
6. The rope must be anti-rotation structure.
Pls measure the change of rope diameter under different load
