Grooved Winch Drum Material: Carbon Steel, Alloy Steel, Stainless
Steel, Aluminum, High-Strength Steel, Etc
Material Standards: GB, AISI, ASME, ASTM, JIS, DIN, ...
Ambient Temperature: -40 ° C To +45 ° C
Stroage Ambient Temperature: -40 ° C To +50 ° C
Groove Type of Drum: Spiral Grooves or Lebus Grooves
The Rotation Direction of The Drum: Lefthand or Righthand
Processing method: Machine Work
Wire Rope Diameter: 3 MM~100 MM
Processing Equipment: CNC machining center
Groove Drum Composition: Drum core, Flanges, Shaft, Etc
Processing: Rope drums with grooves cut directly into them.Winch
drum with flange, the LBS groove is cut directly into the body of
the
drum, according to customers’ requirements, the flanges are either
welded or screw-bolted. groove geometry is determined by rope
construction, diameter and length, and by application. the drum has
the required mounting dimensions for the actual operating
conditions.
The Advantages of Nylon
1. High mechanical strength, good toughness, high tensile and
compressive strength. Its specific tensile strength is higher than
that of metal, and its compressive strength is similar to that of
metal, but its rigidity is not as good as that of metal.
2. Outstanding fatigue resistance, parts after repeated bending can
still maintain the original mechanical strength.
3. High softening point, heat resistance (such as nylon 46, high
crystalline nylon thermal deformation temperature is high, can be
used for a long time in 150 degrees. PA66 after glass fiber
reinforced, its thermal deformation temperature of 250 degrees or
above).
4. Smooth surface, small friction coefficient, wear-resistant.
5. Corrosion resistance, very alkali and most salt liquid, but also
resistant to weak acid, oil, gasoline, aromatic compounds and
general solvents, aromatic compounds are inert, but not resistant
to strong acid and oxidizer. It can resist the erosion of gasoline,
oil, fat, alcohol, alkali and has good anti-aging ability. Can be
used as lubricating oil, fuel and other packaging materials.
