Split LEBUS Leathers With Roll Plug Welded Or Bolted Connection
Introduce of LEBUS sleeves
Compared with the general non grooved (smooth) drum and spiral
grooved drum, the Grooved Steel Drum has obvious advantages in the
neat winding of multi-layer steel wire rope. Lebus groove makes the
winding of steel wire rope more smooth and the load between layers
is evenly distributed, reduces the irregular, disorderly winding
and rope biting in the process of steel wire rope arrangement,
reduces the damage of steel wire rope, prolongs the service life of
steel wire rope, improves the safety of equipment operation, and
avoids the shutdown time of mechanical equipment due to disorderly
rope replacement.
The disadvantage of LBS rope groove drum is that it is more
complex, so it is a little more expensive than the spiral rope
groove drum. However, this additional cost is quickly compensated
for by the savings in wire rope, which is expensive and takes up
production time to replace.
In order to reduce costs, we produce LEBUS sleeves, which are also
manufactured to the required size of the wire rope. The material
can be either steel or nylon, butt-welded or bolted onto the reel.
This ensures that the wire rope is wrapped in orderly layers on the
reel. When the wire rope can also be replaced, only sleeves can be
replaced instead of the reel, greatly saving the cost and time.
What is the welding process of steel sheet drum group?
Adopting plate blanking roll cylinder and weld longitudinal welds,
checking longitudinal welds and geometric dimensions of cylinder
(diameter, length, inner diameter ellipticity tolerance, etc.). For
large diameter cylinder, adding welding process reinforcement and
machining annular groove of cylinder. There are requirements for
the process of roughing the cylinder outside the circle to process
the outer circle, cylinder length welding (namely ring seam
welding). For the two ends of the cylinder need to add welding
process reinforcement according to the process regulations, and
check the quality of ring welding and machining allowance, cylinder
length processing and both ends of the stop or groove processing
and welding cylinder end flange plate, shaft, inner support ring,
etc.
Product lookview
| GROOVING TYPE | Split LEBUS Leather With Roll Plug Welded Or Bolted Connection |
| PRODUCT OTHER NAME | groove sleeve |
| PROCESSING EQUIPMENT | CNC machining center |
| DRUM GROOVE ROTATION | Lefthand ,Righthand |
| SLING TYPE | Wire rope or cable |
| ROPE CAPACITY | 20-1000M |
| PRODUCT OTHER NAME | LBS groove drum or winch drum |
| GROOVING TYPE | LBS groove |
| PROCESSING EQUIPMENT | CNC machining center |
| DRUM GROOVEROTATION | Lefthand ,Righthand |
| SLING TYPE | Wire rope or cable |
Technical parameters and application
| No | Wire diameter(mm) | Rotation direction | Main drum
diameter(mm) | Main drum length(mm) | Application |
| 1 | 8 10 13 | Lefthand,Righthand | 430 | 763 | The oil workover rig winch,
Towing winch
Tower crane |
| 2 | 13 18 20 | Lefthand,Righthand | 623 | 1144 | Engineering winch,
Lifting winch,Crawler crane |
| 3 | 22 25 26 | Lefthand,Righthand | 730 | 1220 | Oil workover rig ,
Logging Winch |
| 4 | 18 22 32 | Lefthand,Righthand | 670 | 1240 | Drilling Rig Winch,
drawworks |
| 5 | 28 32 36 40 | Lefthand,Righthand | 560 | 630 | Rotating Drilling Rig winch,
Lifting equipment |
| 6 | 26 28 32 45 | Lefthand,Righthand | 760 1146 | 1970 1765 | Offshore Crane,
Marine crane,Mooring winch |
